Publications

Development and analysis of the novel hybridization of a single-flash geothermal power plant with biomass driven sco2-steam rankine combined cycle
Balkan Mutlu, Derek Baker, Feyza Kazanç - Entropy , July 2021
A microfluidic device enabling drug resistance analysis of leukemia cells via coupled dielectrophoretic detection and impedimetric counting
Yağmur Demircan Yalçın, Taylan Berkin Töral, Sertan Sukas, Ender Yıldırım, Özge Zorlu, Ufuk Gündüz, Haluk Külah - scientific reports , July 2021
Constrained discrete-time optimal control of uncertain systems with adaptive Lyapunov redesign
Oğuz Han Altıntaş, Ali Emre Turgut - Turkish Journal of Electrical Engineering and Computer Sciences , July 2021
Efficient exascale discretizations: High-order finite element methods
Tzanio Kolev, (...), Ali Karakus, (...), Vladimir Tomov - The International Journal of High Performance Computing Applications , July 2021
Developing and implementation of an optimization technique for solar chimney power plant with machine learning
Oğuzhan Ulucak, Eyup Kocak, Özgür Bayer, Ulaş Beldek, Ekin Özgirgin Yapıcı, Ece Aylı - Journal of Energy Resources Technology , July 2021
Microstructure and nanomechanical behavior of sputtered CuNb thin films
Mohammad Abboud, Amir Motallebzadeh, Özgür Duygulu, Robert Maaß, Sezer Özerinç - Intermetallics , July 2021
On the Performance of Isotropic Hyperelastic Constitutive Models for Rubber-Like Materials: A State of the Art Review
Dal H., Açıkgöz K., Badienia Y. - Applied Mechanics Reviews , May 2021
Identifying the Joint Dynamics of a Bolted Beam System by using FRF Decoupling and the SEMM Expansion Technique
Klaassen, S., Cigeroglu, E., Özgüven, H. N. - Tribomechadynamics 2019 , July 2020
Dynamic Modeling of Bolted Joints Using a Structural Modification Method
Tekin, M., Özgüven H. N. - IMAC XXXVIII: Conference & Exposition on Structural Dynamics , February 2021
Numerical Computation of Nonlinear Normal Modes (NNMs) by using Response Dependent Nonlinear Mode (RDNM) Concept
Karaağaçlı, T., Cigeroglu E., Özgüven H. N. - IMAC XXXVIII: Conference & Exposition on Structural Dynamics , February 2021
Response-Controlled Stepped-Sine Test (RCT): A New Approach in Measuring Frequency Responses of Nonlinear Systems
Karaağaçlı, T., Özgüven H. N. - XXXVIII: Conference & Exposition on Structural Dynamics , February 2021
A frequency domain nonparametric identification method for nonlinear structures: Describing surface method
Karaağaçlı, T., Özgüven H. N. - Mechanical Systems and Signal Processing , October 2020
Experimental modal analysis of nonlinear systems by using response-controlled stepped-sine testing
Karaağaçlı, T., Özgüven H. N. - Mechanical Systems and Signal Processing , January 2021
Experimental Identification of Backbone Curves of Strongly Nonlinear Systems by Using Response-Controlled Stepped-Sine Testing (RCT)
Karaağaçlı, T., Özgüven, H.N. - Vibration , September 2020
Experimental modal analysis of geometrically nonlinear structures by using response-controlled stepped-sine testing
Karaağaçlı, T., Özgüven H. N. - IMAC XXXIX: Conference & Exposition on Structural Dynamics , February 2021
An extended view for acoustofluidic particle manipulation: Scenarios for actuation modes and device resonance phenomenon for bulk-acoustic-wave devices
Özer, M.B., Çetin, B. - Journal of the Acoustical Society of America , May 2021
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7A-2020, art. no. V07AT07A021.
Hu, J., Turgut, A.E., Lennox, B., Arvin, F. - IEEE Transactions on Circuits and Systems II: Express Briefs. , May 2021
Modelling, control and design of a clutched parallel elastically actuated articulated robotic leg through virtual tunable damping
Tanfener, E., Candan, S.S., Turgut, A.E., Saranli, U. - ASME International Mechanical Engineering Congress and Exposition, Proceedings , March 2021
Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review
Bakır, A.A., Atik, R., Özerinç, S. - Rapid Prototyping Journal , February 2021
A self-adaptive landmark-based aggregation method for robot swarms
Sadeghi Amjadi, A., Raoufi, M., Turgut, A.E. - Adaptive Behavior , February 2021
Interactions during CO2Co-gasification of Biomass and Coal Chars Obtained from Fast Pyrolysis in a Drop Tube Furnace
Magalhães, D., Akgül, A., Kazanç, F., Costa, M. - Energy and Fuels , February 2021
Investigation of the structural, magnetic, and cooling performance of AlFe thin film and AlFeGd nanometric giant magnetocaloric thin films
Pat, S., Bayer, Ö., Akay, S.K., Mohammadigharehbagh, R., Kaya, M. - Journal of Materials Science: Materials in Electronics , February 2021
Tiling of microstructures according to the density values of SIMP topology optimization
Helvaci, D.O., Yaman, U. - Procedia Manufacturing , February 2021
Current trends and research opportunities in hybrid additive manufacturing
Dilberoglu, U.M., Gharehpapagh, B., Yaman, U., Dolen, M. - International Journal of Advanced Manufacturing Technology. , February 2021