Latest Articles

Failure behavior of scarf-bonded woven fabric CFRP laminates
Evren Sonat, Sezer Özerinç - Composite Structures , November 2020
Multiplex enumeration of: Escherichia coli and Salmonella enteritidis in a passive capillary microfluidic chip
Üzeyir Dogan, Esin Nagihan Kasap, Ferah Sucularlı, Ender Yildirim, Ugur Tamer, Demet Cetin, Zekiye Suludere, Ismail Hakkı Boyaci, Nusret Ertas - Analytical Methods , November 2020
A novel microfluidic method utilizing a hydrofoil structure to improve circulating tumor cell enrichment: Design and analytical validation
Gürhan Özkayar, Ege Mutlu, Şebnem Şahin,Yağmur Demircan Yalçın, Taylan Töral ,Haluk Külah, Ender Yildirim, ,Özge Zorlu, Ebru Özgür - Micromachines , November 2020
CNNFOIL: convolutional encoder decoder modeling for pressure fields around airfoils
Cihat Duru, Hande Alemdar, Özgür Uğraş Baran  - Neural Computing and Applications , November 2020
An engineered pancreatic cancer model with intra-tumoral heterogeneity of driver mutations
Moon, H.-R., Ozcelikkale, A., Yang, Y., Elzey, B.D., Konieczny, S.F., Han, B. - Lab on a Chip , October 2020
Multi objective optimization of water jet guided laser micro drilling on Inconel 718 using Taguchi Method
Subasi, L., Gokler, M.I., Yaman, U. - Procedia CIRP , September 2020
Modeling and numerical simulations of lignite char gasification with CO2: The effect of gasification parameters on internal transport phenomena
Karaca, M., Kaya, D., Yozgatligil, A., Gökalp, I. - Fuel , February 2021
TGA and kinetic study of different torrefaction conditions of wood biomass under air and oxy-fuel combustion atmospheres
Barzegar, R., Yozgatligil, A., Olgun, H., Atimtay, A.T. - Journal of the Energy Institute , July 2020
Modeling and fabrication of electrostatically actuated diaphragms for on-chip valving of MEMS-compatible microfluidic systems
Atik, A.C., Özkan, M.D., Özgür, E., Külah, H., Yildirim, E. - Journal of Micromechanics and Microengineering , July 2020
Low-Cost microfabrication tool box
Charmet, J., Rodrigues, R., Yildirim, E., Challa, P.K., Roberts, B., Dallmann, R., Whulanza, Y. - Micromachines , January 2020
On the analysis and design of a fully compliant large stroke slider-crank (rocker) mechanism
Tanik, C.M., Tanlk, E., Yazicioglu, Y., Parlaktaş, V. - Mechanical Sciences , February 2020
Control of flow structure over a non-slender delta wing using passive bleeding
Kestel, K., Ramazanlı, B., Yavuz, M.M. - Aerospace Science and Technology , November 2020
Interaction network effects on position- And velocity-based models of collective motion
Turgut, A.E., Boz, İ.C., Okay, İ.E., Ferrante, E., Huepe, C. - Journal of the Royal Society Interface , August 2020
Occlusion-Based Coordination Protocol Design for Autonomous Robotic Shepherding Tasks
Hu, J., Turgut, A.E., Krajnik, T., Lennox, B., Arvin, F. - IEEE Transactions on Cognitive and Developmental Systems , August 2020
Extended artificial pheromone system for swarm robotic applications
Na, S., Raoufi, M., Turgut, A.E., Krajník, T., Arvin, F. - Proceedings of the 2019 Conference on Artificial Life: How Can Artificial Life Help Solve Societal Challenges, ALIFE 2019 , July 2020
Bio-inspired artificial pheromone system for swarm robotics applications
Na, S., Qiu, Y., Turgut, A.E., Ulrich, J., Krajník, T., Yue, S., Lennox, B., Arvin, F. - Adaptive Behavior , June 2020
Knotless anchors offer better prevention of meniscal excursion than knotted anchors: An experimental study of the bovine knee
Eren, M.B., Aşçı, M., Tönük, E., Balta, O., Kurnaz, R. - Acta orthopaedica et traumatologica turcica , January 2020
Effect of stenosis shape on the sound emitted from a constricted blood vessel
Ozden, K., Sert, C., Yazicioglu, Y. - Medical and Biological Engineering and Computing , January 2020
Numerical investigation of wall pressure fluctuations downstream of concentric and eccentric blunt stenosis models
Ozden, K., Sert, C., Yazicioglu, Y. - Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine , October 2020
Design of a tuned vibration absorber for a slender hollow cylindrical structure
Aksoy, T., Özgen, G.O., Acar, B. - Mechanics Based Design of Structures and Machines , August 2020
Effect of fused deposition modeling process parameters on the mechanical properties of recycled polyethylene terephthalate parts
Bakır, A.A., Atik, R., Özerinç, S. - Journal of Applied Polymer Science , August 2020
A novel artificial pancreas: Energy efficient valveless piezoelectric actuated closed-loop insulin pump for T1DM
Kaçar, A., Özer, M.B., Taşcioğlu, Y. - Applied Sciences (Switzerland) , July 2020
Investigation of effect of design and operating parameters on acoustophoretic particle separation via 3D device-level simulations
Şahin, M.A., Çetin, B., Özer, M.B. - Microfluidics and Nanofluidics , January 2020
Pose invariant people detection in point clouds for mobile robots
Hacinecipoglu, A., Konukseven, E.I., Koku, A.B. - International Journal of Mechanical Engineering and Robotics Research , May 2020
Fast head detection in arbitrary poses using depth information
Hacinecipoglu, A., Konukseven, E.I., Koku, A.B. - Sensor Review , March 2020
Multiple human trajectory prediction and cooperative navigation modeling in crowded scenes
Hacinecipoglu, A., Konukseven, E.I., Koku, A.B. - Intelligent Service Robotics , July 2020
An experimental and numerical study on the combustion of lignites from different geographic origins
Özer, B., Debiagi, P.E.A., Hasse, C., Faravelli, T., Kazanç, F. - Fuel , October 2020
A study on the effects of various combustion parameters on the mineral composition of Tunçbilek fly ash
Akın, S.Ş., Magalhães, D., Kazanç, F. - Fuel , September 2020
A theoretical framework for comprehensive modeling of steadily fed evaporating droplets and the validity of common assumptions
Akkus, Y., Çetin, B., Dursunkaya, Z. - International Journal of Thermal Sciences , December 2020
On the effect of structural forces on a condensing film profile near a fin-groove corner
Akdag, O., Akkus, Y., Dursunkaya, Z. - International Communications in Heat and Mass Transfer , July 2020
Comparison of multi-objective and single-objective approaches in feasibility enhanced particle swarm optimization
Hasanoğlu, M.S., Dölen, M. - Journal of the Faculty of Engineering and Architecture of Gazi University , January 2020
The effect of strain rate and temperature on forming limit diagram for DKP-6112 and AZ31 materials
Goksen, S., Darendeliler, H. - Procedia Manufacturing , April 2020
Oblique surface cracking and crack closure in an orthotropic medium under contact loading
Toktaş, S.E., Dag, S. - Theoretical and Applied Fracture Mechanics , October 2020
Forced vibrations of functionally graded annular and circular plates by domain-boundary element method
Eshraghi, I., Dag, S. - ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik , May 2020
Domain-boundary element method for forced vibrations of fiber-reinforced laminated beams
Ahmed, Z., Eshraghi, I., Dag, S. - International Journal of Computational Methods in Engineering Science and Mechanics , June 2020
Moving contact problems involving a rigid punch and a functionally graded coating
Balci, M.N., Dag, S. - Applied Mathematical Modelling , May 2020
Vibration reduction of a structure by using nonlinear tuned vibration absorbers
Dogan, M.E., Cigeroglu, E. - Conference Proceedings of the Society for Experimental Mechanics Series , January 2021
On the solution of nonlinear algebraic equations following periodic forced response analysis of nonlinear structures using different nonlinear solvers
Kizilay, H.S., Cigeroglu, E. - Conference Proceedings of the Society for Experimental Mechanics Series , January 2021
An improved quasi-zero stiffness vibration isolation system utilizing dry friction damping
Donmez, A., Cigeroglu, E., Ozgen, G.O. - Nonlinear Dynamics , May 2020
Nonlinear dynamic analysis of a drivetrain composed of spur, helical and spiral bevel gears
Yavuz, S.D., Saribay, Z.B., Cigeroglu, E. - Nonlinear Dynamics , May 2020
Enhancement of the reliability of MEMS shock sensors by adopting a dual-mass model
Fathalilou, M., Soltani, K., Rezazadeh, G., Cigeroglu, E. - Measurement: Journal of the International Measurement Confederation , March 2020
Reduced Order Modeling of Bolted Joints in Frequency Domain
Karapistik, G., Cigeroglu, E. - Conference Proceedings of the Society for Experimental Mechanics Series , January 2020
A Novel Computational Method to Calculate Nonlinear Normal Modes of Complex Structures
Samandari, H., Cigeroglu, E. - Conference Proceedings of the Society for Experimental Mechanics Series , January 2020
A novel modal superposition method with response dependent nonlinear modes for periodic vibration analysis of large MDOF nonlinear systems
Ferhatoglu, E., Cigeroglu, E., Özgüven, H.N. - Mechanical Systems and Signal Processing , January 2020
Nonlinear 3D Modeling and Vibration Analysis of Horizontal Drum Type Washing Machines
Baykal, C., Cigeroglu, E., Yazicioglu, Y.
Comparison of Linear and Nonlinear Modal Reduction Approaches
Ferhatoglu, E., Dreher, T., Cigeroglu, E., Krack, M., Özgüven, H.N. - Conference Proceedings of the Society for Experimental Mechanics Series , June 2020
Development of silica fume-based geopolymer foams
Shakouri, S., Bayer, Ö., Erdoğan, S.T. - Construction and Building Materials , November 2020
Thermomechanical interactions between crustal magma chambers in complex tectonic environments: Insights from Eastern Turkey
Karaoğlu, Ö., Bayer, Ö., Turgay, M.B., Browning, J. - Tectonophysics , October 2020
Experimental based numerical approach for determination of volumetric heat transfer coefficients of modified graphite foams
Gürüf, G., Solmuş, İ., Bilen, K., Bayer, Ö. - Applied Thermal Engineering , June 2020
On the optimization of a vertical twisted tape arrangement in a channel subjected to MWCNT–water nanofluid by coupling numerical simulation and genetic algorithm
Pourfattah, F., Sabzpooshani, M., Bayer, Ö., Toghraie, D., Asadi, A. - Journal of Thermal Analysis and Calorimetry , March 2020
Performance comparison of electric-vehicle drivetrain architectures from a vehicle dynamics perspective
Bayar, K. - Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , August 2020
A Monte Carlo method to solve for radiative effective thermal conductivity for particle beds of various solid fractions and emissivities
Johnson, E., Tarı, İ., Baker, D. - Journal of Quantitative Spectroscopy and Radiative Transfer , July 2020
Modeling, transient simulations and parametric studies of parabolic trough collectors with thermal energy storage
Akba, T., Baker, D., Yazıcıoğlu, A.G. - Solar Energy , March 2020
Solar-thermal driven drying technologies for large-scale industrial applications: State of the art, gaps, and opportunities
Kamfa, I., Fluch, J., Bartali, R., Baker, D. - International Journal of Energy Research , July 2020
A Dual-Resonator Temperature Sensing Approach with Time Base Error Suppression
Kaya, O., Kose, T., Azgin, K. - IEEE Sensors Journal , January 2020
Investigation of process-affected zone in ultrasonic embossing of microchannels on thermoplastic substrates
Sucularli, F., Arikan, M.A.S., Yildirim, E. - Journal of Manufacturing Processes , February 2020
An extended eight-chain model for hyperelastic and finite viscoelastic response of rubberlike materials: Theory, experiments and numerical aspects
Dal, H., Gültekin, O., Açıkgöz, K. - Journal of the Mechanics and Physics of Solids , December 2020
A phase-field model for fracture of unidirectional fiber-reinforced polymer matrix composites
Denli, F.A., Gültekin, O., Holzapfel, G.A., Dal, H. - Computational Mechanics , January 2020
A quasi-incompressible and quasi-inextensible finite element analysis of fibrous soft biological tissues
Gültekin, O., Rodoplu, B., Dal, H. - Biomechanics and Modeling in Mechanobiology , June 2020

News

all news >>

prospectivestudents
admissionguide
alumni
forms
directory
directory

Announcements

all announcements >>

Job Opportunities

prospectivestudents
admissionguide
prospectivestudents
admissionguide
prospectivestudents
admissionguide

Facebook